28 Offshore

28 Offshore photo

Hull Specifications

28 Offshore technical drawing
Length: 9.1m / 30' 2"
Beam: 2.6 m / 102"
Side: 101.6 cm x 4.06 mm / 40" x .160"- 5086 H116
Btm Width: 243.84 cm x 6.35 mm / 96" x .250"- 5086 H116 w/Reverse Chine
Dry Weight: 2498kg / 5509lbs
Deadrise: Bow 39°, Forward 26°, Transom 19°
Fuel Cap: 492.1 L / 121 USG diurnal fuel system
Max HP: 373kw / 500 HP
Max Cap: 10 person or 1650lb, 750kg
4500lb (2041kg) motor, persons, gear
400HP Twin Yamaha F200XCA (PDF)

Standard Features

  • 30″ Single / 25″ twin engine offshore bracket with integral bottom
  • Full reverse chine bottom design
  • Full-width tread plate swim platform
  • Extruded chine, formed toe rail and keel strip
  • Full hard top (96″) w/ forward leaning windows, grab handles, red/white LED cabin lights, Alaskan bulkhead, tread plate roof, 3″ full length top grab rails, & cabin side mount rod/net holders
  • Cuddy cabin with evac hatch, storage, shelving, cushions, and
  • 2 LED red/white cabin lights
  • Swept bow with rails and self-draining anchor rope locker
  • Transom w/ walk-thru door, 37-gallon fish box, cutting board lid & locking rigging compartment doors
  • 4 Side storage trays with gunwale rod racks- 2 per side
  • Gunwale side tray access step/seats with grab handles
  • 158-gallon (50″) insulated floor fish box w/ macerator pump out
  • Self-draining cockpit w/ composite UV resistant flooring NEW FOR 2022
  • Pressure tested sub floor fuel cell
  • Heavy duty welded double bow eye
  • 2 – Welded stern eyes
  • 7 – 8″ Welded cast cleats
  • Transducer brackets
  • Choice of 3 granite paint colors on boat interior
  • Exterior of cabin and half side paint
  • Non-skid foam pads on gunwales and cuddy cabin NEW FOR 2022
  • Side stripes & vinyl graphics
  • Offshore zinc anodes – 2x
  • Stainless steel thru-hull fittings below waterline w/ seacock valves
  • Forward scuppers in cockpit drain trays
  • Framed glass package including 3 piece fixed front windshield, sliding side windows w/ screens, rear bulkhead windows, V-berth side windows & lockable sliding bulkhead door
  • Mariner suspension seats w/ swivels on aluminum risers w/ foot rests
  • 47″ bench storage seats w/ access doors
  • Port console storage
  • Vinyl covered marine grade plywood floors inside cabin
  • Carpeted sidewalls inside of cabin
  • Floor courtesy lights
  • Stainless steel cup holders inside cabin
  • Cuddy Cabin doors NEW FOR 2022
  • Cabin sub-floor storage w/ vinyl-wrapped boards NEW FOR 2022
  • Aft deck LED work lights
  • Hydraulic steering system w/ tilt helm NEW FOR 2022
  • Driver dash w/ rocker switches, fuel gauge, trim tab controls, and room for 2-12″ screens NEW FOR 2022
  • 3- Pantograph windshield wipers
  • Dual USB ports at port dash, starboard dash, and in V-berth
  • LED navigation and anchor lights, SS marine horn
  • Electric trim tabs
  • 3- Auto bilge pumps & 1 high water bilge alarm
  • CO detectors in V-berth and main cabin
  • Washdown
  • Fuel water separator
  • Dual battery switch w/ boots (no batteries included)

Build It

“What I like most about this 28 Offshore is its performance. Top speed of 44 mph and a comfortable cruising speed of 32 mph with twin Yamaha 150’s make it very fuel-efficient.”

– Brian D., Red Deer, AB

Deadrise Defined

Deadrise schematic

Take the guesswork out of selecting the right hull design. Duckworth Boats provide three points of measurement on the hull. Each angle is engineered for optimal performance.