Hull Specifications

Length: 10.39m / 34' 1"
Beam: 2.9m / 114"
Side: 111.8cm / 44"
Btm Width: 274.3cm / 108"
Dry Weight: 3,239 kg / 7,140 lbs
Deadrise: Bow 39°, Forward 26°, Transom 19°
Fuel Cap: 852 L / 225 USG diurnal fuel system
Max HP: 634kw / 850 HP
Max Cap: 12 person or 1980 lb, 898kg)
5200 lb (2359kg) motor, persons, gear
5200 lb (2359kg) motor, persons, gear
Standard Features
- 25″ twin engine offshore bracket with integral bottom sheet
- Full reverse chine bottom design
- Full-width tread plate swim platform
- Extruded chine, formed toe rail and keel strip
- Full hard top (116″) w/ forward leaning windows, grab handles, red/white LED cabin lights, Alaskan bulkhead, tread plate roof, 3″ full length top grab rails, and offset aisleway.
- Cuddy cabin with 24″ bow access hatch, storage, shelving, cushions, and 2 LED red/white cabin lights
- Swept bow with full-wrap bow rails
- Mounting tub for anchor winch
- Transom w/ 42-gallon fish box, cutting board lid & locking rigging compartment doors
- 4 Side storage trays with gunwale rod racks-2 per side
- Gunwale side tray access step/seats with grab handles
- Dual 80-gallon insulated aft sub-floor fish boxes with self draining lids and individual macerator pumps
- Self-draining cockpit w/ composite UV resistant flooring NEW FOR 2022
- Transom Walk-thru door
- Pressure tested sub floor fuel cell
- Billet aluminum welded bow eye & stern eyes
- 7 – 11″ billet aluminum welded cleats
- Transducer brackets
- Choice of 3 granite paint colors on boat interior
- Painted exterior and half side paint
- Non-skid foam padding on gunwales
- Side stripes & vinyl graphics
- Offshore zinc anodes – 2x
- Stainless steel thru-hull fittings below waterline w/ seacock valves
- Cabin side mount rod holders w/ net holder
- Forward scuppers in rear deck drain trays
- Rear deck sub-floor storage compartment
- Framed glass package including 3 piece fixed front windshield, sliding side windows w/ screens, rear bulkhead windows, V-berth side windows, and lockable sliding bulkhead door
- Stbd Helm SD Mariner suspension seat w/swivel on aluminum riser w/drawer & foot rest
- Dual Passenger SD Mariner suspension seats
- Dinette with seating for 4 w/ 2 drawers, converts to bed with insert cushion
- 3-window head w/floor drain, electric toilet, 21 gal. holding tank, overboard discharge, and curtain package
- Galley with sink, faucet, 12V/110V drawer fridge, and 21 gal. fresh water tank
- V-berth Sleeper with room for 2 people (approx. 78″L x 45″W)
- V-berth Cabin Doors
- Bonus sleeping compartment/storage area
- Cabin sub-floor storage w/ vinyl-wrapped boards NEW FOR 2022
- Forward overhead storage cabinet
- Port console with storage
- Carpeted cabin sidewalls
- Vinyl covered marine grade plywood floors inside cabin
- Overhead and floor courtesy lighting
- 7 – Stainless steel cup holders
- Aft deck LED work lights
- Hydraulic steering w/ Tilt helm
- Driver dash w/stainless steel LED switches, fuel gauge, trim tab controls, 4- USB ports, and room for 2-12″ flush
mount screens - 3- Pantograph windshield wipers
- LED Navigation & anchor lights
- Electric trim tabs
- Stainless steel marine horn
- 3- Auto bilge pumps & 1 high water bilge alarm
- Carbon monoxide detector in V-berth and main cabin
- Washdown
- Fuel water separator
- Single group 27 AGM battery for each motor
- Dual group 31 AGM batteries for house
- Remote battery switches for each battery bank w/emergency start crossover
Build It
“My dream boat.”
– David B.,
Deadrise Defined

Take the guesswork out of selecting the right hull design. Duckworth Boats provide three points of measurement on the hull. Each angle is engineered for optimal performance.