Pacific Navigator Sport

Pacific Navigator Sport photo

Hull Specifications

Pacific Navigator Sport technical drawing
Length: 6.43 m / 22' 8"
Beam: 2.27 m / 93.5"
Side: 88.9 cm x 3.16 mm /35" x .125" (5052-H32)
Btm Width: 182.88 cm x 4.83 mm / 72" x .190" (5052-H34)
Dry Weight: 874 kg / 1925 lbs
Deadrise: Bow 30°, Forward 24°, Transom 14°
Fuel Cap: 158.99 L / 42 USG diurnal fuel system
Max HP: 150 kw / 200 HP
Max Cap: 6 person or 990 lb, 450 kg
2090 lb (950 kg) motor, persons, gear
Performance
Bulletins:
150HP Yamaha F150XA (PDF)

Standard Features

  • Single engine offshore bracket with integral bottom sheet
  • 3/4 width swim platform
  • Extruded chine, toe rail, keel strip & gunwales
  • Full reverse chine bottom design
  • 5 piece welded, walkthrough windshield with grab handles
  • Recessed self bailing diamond tread bow
  • 3″ polished stern rails
  • Bow storage (Room for 2nd battery)
  • Passenger console tray w/grab handle
  • Fisherman’s transom with fish box, self draining utility area,
  • 2-piece cutting board hatch lid and framed rigging access panels
  • Side storage trays with gunwale rod racks – 2 per side
  • Welded double bow eye
  • 2 – welded stern eyes
  • 5 – 8″ welded cleats
  • Transducer brackets
  • Pressure tested subfloor fuel cell – diurnal system compliant
  • Choice of standard paint colors
  • Top, 1/2 side, and deck paint
  • Side stripes & vinyl graphics
  • Granite color paint on gunwales
  • Zinc anodes – 2x
  • Standard folding seats on fixed-height pedestals w/ locking seat swivels
  • 26″ Rear bench seats w/back rest
  • Heavy duty convertible top with side curtains
  • Backdrop curtain
  • Vinyl covered marine grade plywood floors and kick panels
  • Stainless steel cup holders
  • Carpeted Sidewalls
  • Netted Storage
  • Rear transom storage
  • Sub floor storage
  • Anti-feedback steering
  • Instrument panel w/ fuel gauge and USB port
  • LED Navigation lights and anchor lights
  • Stainless steel marine horn
  • Bilge pump
  • Fuel water separator
  • Single Battery Switch only (No Battery)

Build It

“The workmanship of the consistent Heliarc welds, fit and finish, and design as compared to many of the other boats I have seen, sets the quality of the Duckworth heads and shoulders above other boats. When I was shopping for boats five years ago at the boat shows, those specific features convinced me to purchase a Duckworth. ”

– Robert Y. , Edgewood, WA

Deadrise Defined

Deadrise schematic

Take the guesswork out of selecting the right hull design. Duckworth Boats provide three points of measurement on the hull. Each angle is engineered for optimal performance.