22 Pacific Pro

22 Pacific Pro photo

Hull Specifications

22 Pacific Pro technical drawing
Length: 7.7 m / 25'3"
Beam: 2.6 m / 102"
Side: 99.06 cm x 3.175 mm / 39" x .125"
Btm Width: 228.6 cm x 4.83 mm / 90" x .190" w/ Reverse Chine
Dry Weight: 1597 kg / 3520 lbs
Deadrise: Bow: 32° Forward: 28° Transom: 18°
Fuel Cap: 317 L / 84 USG diurnal fuel system
Max HP: 224kw / 300 HP
Max Cap: 8 person or 1320lb, (600kg)
3000lb (1360kg) motor, persons, gear

Standard Features

  • 25″ Single engine offshore bracket with integral bottom sheet and full width swim platform
  • Extruded chine, gunwale, toe rail and keel strip
  • Full reverse chine bottom design
  • Seafaring full hard top (88″) w/aft leaning windshield, top trays, red/white LED cabin lights, marine grade aluminum slider side windows, 3″ top rails, tread plate roof, & clear vinyl backdrop
  • Swept bow design w/recessed self bailing bow, 54 gallon bow box
  • Bow storage (Room for 2nd battery)
  • Full wrap 26″ polished bow rails
  • Fishermen’s Transom with 35 gallon fish box, self draining utility area,
  • 2 piece cutting board hatch lid and framed rigging access panels
  • Side storage trays with gunwale rod racks- 2 per side
  • 105 gallon floor fish box w/ macerator pump out
  • Self-draining rear deck
  • Pressure tested sub floor fuel cell
  • Welded double bow eye
  • 2 – Welded stern eyes
  • 7 – 8″ Welded cast cleats
  • Trim tab brackets
  • Transducer brackets
  • Choice of 2 standard granite color paint on cabin, deck, gunwales, and interior
  • Half side and transom paint w/side striping and vinyl graphics, includes top brow
  • Full fisherman’s interior in rear deck
  • Offshore zinc anodes – 2x
  • Stainless steel thru-hull fittings below waterline w/ seacock valves
  • Composite aft deck flooring
  • Severe duty mariner seats w/swivels
  • 37″ Rear bench seats w/back rest
  • Passenger tray w/grab handle
  • Overhead storage compartment
  • Vinyl covered marine grade plywood floors inside cabin
  • Back drop
  • Carpeted sidewalls inside of cabin
  • 8-Stainless steel cup holders inside cabin
  • Sub floor storage
  • Netted storage
  • Rear padded bolster rails w/ 4 cup holders
  • Driver and Passenger side pantograph wiper
  • Hydraulic steering system w/ tilt helm
  • Switch panel w/ fuel gauge and USB port
  • LED Navigation lights and anchor lights
  • LED aft deck lights
  • Stainless steel marine horn
  • Forward and aft bilge pumps w/auto float switches
  • Fuel water separator
  • Wash down
  • Single battery switch only (No Battery)

Build It

“Fun to drive and a blast to fish out of. Roomy and comfortable. Just a nice boat in all aspects.”

– Jim B., Clatskanie, OR

Deadrise Defined

Deadrise schematic

Take the guesswork out of selecting the right hull design. Duckworth Boats provide three points of measurement on the hull. Each angle is engineered for optimal performance.