Pacific Pro
22 Pacific Pro
The Duckworth 22 Pacific Pro is a testament to maritime engineering
With its pronounced upswept bow and a formidable 32-degree bow deadrise, The 22 Pacific Pro is designed to tackle the high seas with confidence and ease.
It stands as a fortress on the water, boasting a substantial 39.5″ side height to shield against the elements and ensure passenger safety. This vessel is not just about resilience; it’s about choice, offering a robust full hardtop for those who prefer a secure, enclosed experience on their voyages. For adventurers who demand versatility, the optional Alaskan bulkhead with a lockable door provides the flexibility and accessibility needed for diverse maritime endeavors.
The Pacific Pro isn’t merely equipped for the ocean—it’s a vessel that commands it, with features that promise security and control amidst the unpredictability of open waters.
Specifications
| Length (including bracket) |
25’3″ / 7.7m |
|---|---|
| Beam | 102″ / 2.6 m |
| Bottom | 90″ x .190″ w/ Reverse chine / 228.6cm x 4.83mm |
| Side | 39″ x .125″ / 99.06 cm x 3.175 mm |
| Dry Weight | 3520lbs / 1597kg |
| Fuel | 84 USG diurnal fuel system / 317L |
| Deadrise | Bow: 32° Forward: 28° Transom: 18° |
| Max HP Rating | 300HP/ 224kw |
| Maximum Capacities | 8 person or 1320lb, (600kg) 3000lb (1360kg) motor, persons, gear |
Build Your Own Duckworth
Customize your boat how you want it.
Deadrise
STANDARD FEATURES
Hull Features
- 25″ Single engine offshore bracket with integral bottom sheet and full width swim platform
- Extruded chine, gunwale, toe rail and keel strip
- Full reverse chine bottom design
- Seafaring full hard top (88″) w/aft leaning windshield, top trays, red/white
- LED cabin lights, marine grade aluminum slider side windows, 3″ top rails, tread plate roof, & clear vinyl backdrop
- Swept bow design w/recessed self bailing bow, 54 gallon bow box
- Bow storage (Room for 2nd battery)
- Full wrap 26″ polished bow rails
- Fishermen’s Transom with 35 gallon fish box, self draining utility area,
- 2 piece cutting board hatch lid and framed rigging access panels
- Side storage trays with gunwale rod racks- 2 per side
- 105 gallon floor fish box w/ macerator pump out
- Self-draining rear deck
- Pressure tested sub floor fuel cell
- Welded double bow eye
- 2 – Welded stern eyes
- 7 – 8″ Welded cast cleats
- Trim tab brackets
- Transducer brackets
Exterior Features
- Choice of 2 standard granite color paint on cabin, deck, gunwales, and interior
- Half side and transom paint w/side striping and vinyl graphics, includes top brow
- Full fisherman’s interior in rear deck
- Offshore zinc anodes – 2x
- Stainless steel thru-hull fittings below waterline w/ seacock valves
- Composite aft deck flooring
Interior Features
- Severe duty mariner seats w/swivels
- 37″ Rear bench seats w/back rest
- Passenger tray w/grab handle
- Overhead storage compartment
- Vinyl covered marine grade plywood floors inside cabin
- Back drop
- Carpeted sidewalls inside of cabin
- 8-Stainless steel cup holders inside cabin
- Sub floor storage
- Netted storage
- Rear padded bolster rails w/ 4 cup holders
Rigging Options
- Driver and Passenger side pantograph wiper
- Hydraulic steering system w/ tilt helm
- Switch panel w/ fuel gauge and USB port
- LED Navigation lights and anchor lights
- LED aft deck lights
- Stainless steel marine horn
- Forward and aft bilge pumps w/auto float switches
- Fuel water separator
- Wash down
- Single battery switch only (No Battery)
Our Complete Lineup
